Search for: All records

Plastic-bonded granular materials (PBM) are widely used in industrial sectors, including building construction, abrasive applications, and defense applications such as plastic-bonded explosives. The mechanical behavior of PBM is highly nonlinear, irreversible, rate dependent, and temperature sensitive governed by various micromechanical attributions such as grain crushing and binder damage. This paper presents a thermodynamically consistent, microstructure-informed constitutive model to capture these characteristic behaviors of PBM. Key features of the model include a breakage internal variable to upscale the grain-scale information to the continuum level and to predict grain size evolution under mechanical loading. In addition, a damage internal state variable is introduced to account for the damage, deterioration, and debonding of the binder matrix upon loading. Temperature is taken as a fundamental external state variable to handle non-isothermal loading paths. The proposed model is able to capture with good accuracy several important aspects of the mechanical properties of PBM, such as pressure-dependent elasticity, pressure-dependent yield strength, brittle-to-ductile transition, temperature dependency, and rate dependency in the post-yielding regime. The model is validated against multiple published datasets obtained from confined and unconfined compression tests, covering various PBM compositions, confining pressures, temperatures, and strain rates. 

This research investigates the dynamic response of a novel polyurea foam with different densities by separately submitting samples to single and multiple impacts at different energies ranging from 1.77 to 7.09 J. The impact and transmitted force‐time histories are acquired during the impact events. Deformation of the samples is also recorded using high‐speed photography and analyzed using digital image correlation (DIC) to characterize density‐dependent strain rate and Poisson's ratio. The analyses of the force‐time histories highlight the interrelationship between the incoming impact energy and force characteristics, including amplitude and durations. The experimental results reveal that polyurea foams can absorb nearly 50% of the incoming impact energy irrespective of their density. The dynamic impact efficacy of the foam persists even after sequential impact events are imparted on the same samples, with only a 20% drop in the load‐bearing capacity after seven consecutive impacts. Furthermore, as verified via electron microscopy observations, the higher‐density foam does not exhibit any permanent damage. This high‐density polyurea foam shows reversible auxetic transition at all impact energies considered herein. The outcomes of this research indicate the suitability of polyurea foams for cushioning and impact mitigation applications, especially in repeated biomechanical impact scenarios.